道达尔TOTAL DISOLA M系列　详细说明 DISOLA M 3020 & M 4020 Description Marine oils specially designed for the lubrication of the high and medium speed Diesel engines. Applications Turbocharged main and auxiliary engines of all types and all ratings, running on Marine Diesel Oil(ISO 8217 DMX, DMA, DMB, DMC) or on Intermediate Fuel Oil. Bearings and sterm-tubes. Reduction gear lubricating. Properties API service: better than CF. Excellent thermal stability. Good detergent properties at high temperatures. Good dispersant properties at low temperatures. Good wear protection. Good oil film strength at extreme pressures. Excellent water resistance. Excellent capacity for centrifuging and for separating out water and insoluble’s. Excellent filtration capacity. Very good neutralizing capability of acidic products. Characteristics Characteristics units Disola M 3020 4020 S.A.E. Grade 30 40 Density at 15℃ Kg/m3 902 904 Kinematic viscosity at 40℃ Mm2/s 110 140 Kinematic viscosity at 100℃ Mm2/s 12.0 14.0 Flash Point(COC) ASTM D 92 ℃ >220 >230 Pour Point ℃ -9 -9 BN(ex TBN)ASTM D 2896 MgKOH/g 20 20 Approvals Lubricants in the Disola M range satisfy the requirements and recommendations of the major engine manufacturers. They have proved their worth in thousands of engines of many different types, operating in all conditions. Handling, Health and Safety Lubricants consisting of highly refined mineral oils with specific additives. In normal conditions of use, these lubricants present no particular toxic hazard. All lubricants, of and kind, should always be handled with great care, particularly avoiding any contact with the skin. Prevent any risk of splashing, and keep away form combustible materials. Store under cover and away from any risk of contamination. A safety data sheet complying with current legislation is available from your Lubmarine local representative.